New milestone in thermal insulation from Porextherm

Vacuspeed ® the new system product for quick and easy high performance insulation in surface applications


Vacuspeed® brochure --> see download below

Today, the benefits to insulate with vacuum insulation panels are due to the excellent insulating properties at a much lower thickness compared to conventional materials no longer a question. There are numerous construction applications, where the thin vacuum insulation panels are clearly in advantage. Due to extensive planning in advance, the individual production of the VIPs with longer delivery times and the more complex constructions, often temporal obstacles occur, so that in the past, occasionally works need to be done with conventional insulation solutions.

This will be different now with the Vacuspeed ® System, because the new concept is as simple as it is obvious at once.

The idea - insulate time- and costsaving with system

Vacuspeed ® is a VIP system, that gets along with just four standardized panel sizes in dimensions of 100 x 50 cm, 50 x 50 cm, 50 x 25 cm and 25 x 25 cm and three standard thicknesses (15, 20 and 25 mm).
The Vacuspeed ® panels are officially approved and offer with a rated value of 0.008 W/(m*K), an impressivly good insulation oerformance.
With these standardized formats various surface geometries can by covered for the most part. The remaining boundary surfaces can be covered with a cuttable highly insulating Vacuspeed ® Cut (100 x 12.5 cm) PU-strip.

Four Vacuspeed ®-formats plus the cuttable Vacuspeed ® Cut strip for the edges.Due to the VIPs in double-seam version only very small gaps arise when the panels are joined together. The chosen pattern results in a maximum of 12.5 cm wide circumferential edge which is covered with Vacuspeed Cut ®. This leads to an only slightly increased U-value, based on the total area .

Designed for the practice in construction

Due to the new Vacuspeed ® system, the installation of vacuum insulation panels gets to a child's play now in practice. With just four standardized Vacuspeed ® formats plus the flexible Vacuspeed ® Cut, the planning beforehand gets much easier for every user. The calculation of a layout plan and the required quantities can be easily and quickly managed by architects or craftsmen. The Vacuspeed ® panels can be slide together quickly and almost free of joints. The rest of the area will be filled with the cuttable Vacuspeed Cut ® material, which is easy to handle for the craftsmen.

Packed for the construction site.

What is new is, that the goods are immediately available in convenient forms of packaging. Production- and thereby the resulting delivery times largely disappear in the future.

Vacuspeed ® and Vacuspeed ® Cut are delivered practical for construction, in well protected special packaging. Clear instructions for processing are included.

The Vacuspeed ® brochure you will find in the following download area. The technical approval, technical data sheets, etc. is available for easy download in product area.

Further information on vacuum insulation panels for building applications, see